Germany
Ref IN110
MEMMERT IN110 Natural Convection Incubator
Overview
Natural-convection laboratory incubator with a 108-litre stainless steel chamber, a +20 to +80°C setting range and a SingleDISPLAY digital PID controller, built for research, pharmaceutical, medical and food-analysis laboratories.
Specifications39 values
Temperature
Setting Temperature Range
+20 to +80 °Cdatasheet
Working Temperature Range
At least 5°C above ambient temperature to +80°Cdatasheet
Setting Accuracy
0.1 °Cdatasheet
Temperature Sensor
1 Pt100 sensor DIN class A in 4-wire circuitdatasheet
Control Technology
Language Setting
German, English, Spanish, French, Polish, Czech, Hungariandatasheet
Controller
SingleDISPLAY, adaptive multifunctional digital PID-microprocessor controller with high-definition TFT colour displaydatasheet
Timer
Digital backwards counter, adjustable from 1 minute to 99 daysdatasheet
Function SetpointWAIT
The process time does not start until the set temperature is reacheddatasheet
Calibration
Three freely selectable temperature valuesdatasheet
Adjustable Parameters
Temperature (Celsius or Fahrenheit), air flap position, programme time, time zones, summertime/wintertimedatasheet
Ventilation
Convection
Natural convectiondatasheet
Fresh Air
Admixture of pre-heated fresh air by electronically adjustable air flapdatasheet
Vent
Vent connection with restrictor flapdatasheet
Communication
Documentation
Programme stored in case of power failuredatasheet
Programming
AtmoCONTROL software for reading out, managing and organising the data logger via Ethernet interfacedatasheet
Safety
Temperature Control
Adjustable electronic overtemperature monitor and mechanical temperature limiter TB (protection class 1 per DIN 12880), switches off heating approx. 20°C above nominal temperaturedatasheet
Autodiagnostic System
For fault analysisdatasheet
Standard Equipment
Door
Fully insulated stainless steel door with 2-point locking (compression door lock); inner glass doordatasheet
Internals
2 stainless steel grids, electropolisheddatasheet
Works Calibration Certificate
Included, for +37°Cdatasheet
Stainless Steel Interior
Interior
Easy-to-clean stainless steel, reinforced by deep-drawn ribbing with integrated protected heating on four sidesdatasheet
Volume
108 ldatasheet
Dimensions (W x H x D)
560 x 480 x 400 mmdatasheet
Max. Number of Internals
5datasheet
Max. Loading of Chamber
175 kgdatasheet
Max. Loading per Internal
20 kgdatasheet
Textured Stainless Steel Casing
Dimensions (W x H x D)
745 x 864 x 584 mm (d +56mm door handle)datasheet
Housing
Rear zinc-plated steeldatasheet
Electrical Data
Voltage / Load (230V)
230 V, 50/60 Hz, approx. 1400 Wdatasheet
Voltage / Load (115V)
115 V, 50/60 Hz, approx. 900 Wdatasheet
Ambient Conditions
Altitude of Installation
Max. 2,000 m above sea leveldatasheet
Ambient Temperature
+5 °C to +40 °Cdatasheet
Humidity
Max. 80% rh, non-condensingdatasheet
Overvoltage Category
IIdatasheet
Pollution Degree
2datasheet
Packing/Shipping Data
Country of Origin
Federal Republic of Germanydatasheet
Dimensions incl. Carton (W x H x D)
830 x 1050 x 800 mmdatasheet
Net Weight
Approx. 76 kgdatasheet
Gross Weight (Carton)
Approx. 101 kgdatasheet
Datasheets & documents
Request a quotation
Tell us what you need. We reply with pricing, lead time and the manufacturer datasheet — usually the same working day.
